3Com 4510G Configuration Manual page 689

The configuration of an entity DN must comply with the CA certificate issue policy. You need to
determine, for example, which entity DN parameters are mandatory and which are optional. Otherwise,
certificate request may be rejected.
Follow these steps to configure an entity DN:
To do...
Enter system view
Create an entity and enter its
view
Configure the common name
for the entity
Configure the country code for
the entity
Configure the FQDN for the
entity
Configure the IP address for
the entity
Configure the locality of the
entity
Configure the organization
name for the entity
Configure the unit name for the
entity
Configure the state or province
for the entity
Currently, up to two entities can be created on a device.
The Windows 2000 CA server has some restrictions on the data length of a certificate request. If
the entity DN in a certificate request goes beyond a certain limit, the server will not respond to the
certificate request.
Use the command...
system-view
pki entity entity-name
common-name name
country country-code-str
fqdn name-str
ip ip-address
locality locality-name
organization org-name
organization-unit
org-unit-name
state state-name
10-5
Remarks
—
Required
No entity exists by default.
Optional
No common name is specified
by default.
Optional
No country code is specified by
default.
Optional
No FQDN is specified by
default.
Optional
No IP address is specified by
default.
Optional
No locality is specified by
default.
Optional
No organization is specified by
default.
Optional
No unit is specified by default.
Optional
No state or province is
specified by default.