Configuring A Qos Policy; Defining A Class - 3Com 4510G Configuration Manual

Configuring a QoS Policy

Figure 2-1 shows how to configure a QoS policy.
Figure 2-1 QoS policy configuration procedure
Apply the
policy to an
interface

Defining a Class

To define a class, you need to specify a name for it and then configure match criteria in class view.
Follow these steps to define a class:
To do...
Enter system view
Create a class and enter class
view
Configure match criteria
match-criteria: Match criterion.
Table 2-1 The keyword and argument combinations for the match-criteria argument
acl { access-list-number | name acl-name }
Define a class
Define a behavior
Define a policy
Apply the policy
Apply the
Apply the
policy to
policy to a
online
VLAN
users
system-view
traffic classifier tcl-name
[ operator { and | or } ]
if-match match-criteria
Table 2-1
Form
Apply the
policy
globally
Use the command...
shows the available criteria.
Specifies to match an IPv4 ACL specified by its
number or name. The access-list-number
argument specifies an ACL by its number, which
ranges from 2000 to 4999; the name acl-name
keyword-argument combination specifies an
ACL by its name.
Remarks
—
Required
By default, the relationship
between match criteria is AND.
Required
Description