Deleting The Startup Configuration File For The Next Startup; Restoring The Startup Configuration File - 3Com 4510G Configuration Manual

Before the backup operation, you should:
Ensure that the server is reachable, the server is enabled with TFTP service, and the client has
permission to read and write.
Use the display startup command (in user view) to see whether you have set the startup
configuration file, and use the dir command to see whether this file exists. If the file is set as NULL
or does not exist, the backup operation will fail.

Deleting the Startup Configuration File for the Next Startup

You can delete the startup configuration file to be used at the next system startup using commands. On
a device that has the main and backup startup configuration files, you can choose to delete either the
main or backup startup configuration file. However, in the case that the main and backup startup
configuration files are the same, if you perform the delete operation for once, the system will not delete
the configuration file but only set the corresponding startup configuration file (main or backup,
according to which one you specified in the command) to NULL.
You may need to delete the startup configuration file for the next startup for one of these reasons:
After you upgrade system software, the existing configuration file does not match the new system
software.
The configuration file is corrupted (often caused by loading a wrong configuration file).
After the startup configuration file is deleted, the system will use the null configuration when the device
reboots.
Follow the step below to delete the startup configuration file for the next startup:
To do...
Delete the startup configuration
file for the next startup from the
storage medium
This command will permanently delete the configuration file from all the member devices. Use it with
caution.

Restoring the Startup Configuration File

The restore function allows you to copy a configuration file from TFTP server to the root directory
of the storage media of all the member devices and specify the file as the startup configuration file
to be used at the next system startup.
Follow the step below to restore the startup configuration file to be used at the next system startup:
Use the command...
reset saved-configuration
[ backup | main ]
11-16
Remarks
Required
Available in user view