Configuring The Management Address And Its Encoding Format - 3Com 4510G Configuration Manual

3com switch 4510g family
Table of Contents

Advertisement

To do...
Configure the TLVs to be
advertised

Configuring the Management Address and Its Encoding Format

LLDP encodes management addresses in numeric or character string format in management address
TLVs.
By default, management addresses are encoded in numeric format. If a neighbor encoded its
management address in character string format, you can configure the encoding format of the
management address as string on the connecting port to guarantee normal communication with the
neighbor.
Follow these steps to configure a management address to be advertised and its encoding format on
one or a group of ports:
To do...
Enter system view
Enter
Enter
Ethernet
Ethernet
interface view
interface
view or port
Enter port
group view
group view
Enable LLDP to advertise
management address TLVs,
and optionally, configure a
management IP address if
needed
Configure the encoding
format of the management
address to character string
Use the command...
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name } |
dot1-tlv { all | port-vlan-id |
protocol-vlan-id [ vlan-id ] | vlan-name
[ vlan-id ] } | dot3-tlv { all | link-aggregation |
mac-physic | max-frame-size | power } |
med-tlv { all | capability | inventory |
location-id { civic-address device-type
country-code { ca-type ca-value }&<1–10> |
elin-address tel-number } | network-policy |
power-over-ethernet } }
Use the command...
system-view
interface interface-type
interface-number
port-group manual
port-group-name
lldp management-address-tlv
[ ip-address ]
lldp
management-address-format
string
5-9
Remarks
Optional
By default, all types
of LLDP TLVs except
location identification
TLV are advertisable.
Remarks
Required
Use either command.
Optional
By default, the management
address is sent through
LLDPDUs, and the
management address is the
main IP address of the
lowest-ID VLAN carried on the
interface. If the VLAN is not
assigned a main IP address,
127.0.0.1 is used.
Optional
By default, the management
address is encapsulated in the
numeric format.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents