The Filter Setting Screen; Figure 16: The Firewall > Firewall Options Screen; Table 16: The Firewall > Firewall Options Screen - Hitron CGN2 User Manual

Figure 16: The Firewall > Firewall Options Screen
The following table describes the labels in this screen.
Table 16: The Firewall > Firewall Options Screen
Firewall
Intrusion Detection
System
Ping on WAN Interface
Apply
Cancel
Help
4.3

THE FILTER SETTING SCREEN

Use this screen to configure Media Access Control (MAC) address filtering on the
LAN, and to configure IP filtering.
57 57
HITRON CGN2 USER'S GUIDE
Select this to turn the firewall on.

Deselect this to turn the firewall off.

NOTE: It is strongly recommended that you enable the
CGN2's firewall unless LAN protection is
provided by another device or software.
Select this to turn the intrusion detection system off.

Deselect this to turn the intrusion detection system

on.
Select this to prevent responses to ICMP requests

originating from the WAN.
Select this to allow responses to ICMP requests

originating from the WAN.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies