Table of Contents
Advertisement
Figure 15:
The Firewall > Firewall Options Screen
The following table describes the labels in this screen.
Table 16:
The Firewall > Firewall Options Screen
Firewall
Intrusion Detection
System
Ping on WAN Interface
Apply
Cancel
Help
4.3
THE FILTER SETTING SCREEN
Use this screen to configure Media Access Control (MAC) address filtering on the
LAN, and to configure IP filtering.
57
57
HITRON CGN USER'S GUIDE
Select this to turn the firewall on.
Deselect this to turn the firewall off.
NOTE:
It is strongly recommended that you enable the
CGN's firewall unless LAN protection is provided
by another device or software.
Select this to turn the intrusion detection system off.
Deselect this to turn the intrusion detection system
on.
Select this to prevent responses to ICMP requests
originating from the WAN.
Select this to allow responses to ICMP requests
originating from the WAN.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies
FIREWALL
Advertisement
Table of Contents
