Table 28: The Wireless > Access Control Screen - Hitron CGN2 User Manual

The following table describes the labels in this screen.
Table 28: The Wireless > Access Control Screen
MAC Filtering
SSID
MAC Filtering Mode
Apply
Wireless Control List (up to 16 Items)
# Index
Device Name
MAC Address
Delete
Wireless Devices
Auto-Learned Wireless Devices
Device Name
94 94
HITRON CGN2 USER'S GUIDE
Select the SSID for which you want to configure wireless
access control.
NOTE: At the time of writing, the CGN2 supports a
single SSID.
Use this field to control whether the CGN2 performs
MAC filtering on the wireless network.
Select Allow-All to turn MAC filtering off. All devices

may access the CGN2 and the network wirelessly.
Select Allow to permit only devices with the MAC

addresses you set up in the Wireless Control List to
access the CGN2 and the network wirelessly. All
other devices are denied access.
Select Deny to permit all devices except those with

the MAC addresses you set up in the Wireless
Control List to access the CGN2 and the network
wirelessly. The specified devices are denied access.
Click this to save your changes in the MAC filtering
section.
This displays the index number assigned to the
permitted or denied wireless device.
This displays the name you gave to the permitted or
denied wireless device.
This displays the MAC address of the permitted or
denied wireless device.
Select a permitted or denied wireless device's radio
button ( ) and click this to remove the device from the
list. The device may no longer access the CGN2 and the
network.
This displays the name of each network device that has
connected to the CGN2 on the wireless network.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies