Figure 27: Add Target Email Address - Hitron CGN2 User Manual

Table 26: The Parental Control > Email / Syslog Alert Screen (continued)
Recipient List (up to 4
items)
Syslog Server
Configuration
Syslog Server
Address
Alert Options
When Intrusion is
Detected
Apply
81 81
HITRON CGN2 USER'S GUIDE
Use this section to define up to four target email address
to which admin emails will be sent.
To enter a new target email address, click Add.

Enter the target email address's Name and
Recipient's Address in the fields that display, then
click Apply to save your changes. Alternatively, click
Cancel to return to the previous screen without
saving your changes.
Figure 27: Add Target Email Address
To make changes to an existing target email

address, select its radio button and click Edit. The
screen that displays is the same as the Add Target
Email Address screen.
To remove an email address, select its radio button

and click Delete. The email address is removed from
the list.
Use this section to define the server on which the
system log is stored.
Enter the address of the server on which the system log
is stored.
Use this section to define the actions to be taken when
an intrusion event is detected.
Select Send Email to send an email to the list when

an intrusion event is detected.
Select Send Syslog to send an entry to the system

log when an intrusion event is detected.
Click this to save your changes to the fields in this
screen.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies