The Backup Screen; Figure 14: The Wan/Lan > Debug Screen; Table 14: The Wan/Lan > Debug Screen - Hitron CGN2 User Manual

Click WAN/LAN > Debug. The following screen displays.
Figure 14: The WAN/LAN > Debug Screen
The following table describes the labels in this screen.
Table 14: The WAN/LAN > Debug Screen
IP/URL
Method
Run
Help
3.5

THE BACKUP SCREEN

Use this screen to back up your CGN2's settings to your computer, to load settings
from a backup you created earlier, to reboot your CGN2, or to return it to its factory
default settings.
Click WAN/LAN > Backup. The following screen displays.
52 52
HITRON CGN2 USER'S GUIDE
Enter the IP address or URL that you want to test.
Select the type of test that you want to run on the IP/
URL that you specified.
Click this to perform the test.
Click this to see information about the fields in this
screen.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies