Hitron CGN2 User Manual page 70

Table 21: The Firewall > Port Triggering Screen
Application Name
Port Range
Protocol
Timeout (ms)
Enable
Add New
Edit
Delete
Apply
Cancel
Help
70 70
HITRON CGN2 USER'S GUIDE
This displays the arbitrary name you assigned to the
rule when you created it.
These fields display the ports to which the rule applies:
The Trigger field displays the range of outgoing

ports. When the CGN2 detects activity (outgoing
traffic) on these ports from computers on the LAN, it
automatically opens the Target ports.
The Target field displays the range of triggered

ports. These ports are opened automatically when
the CGN2 detects activity on the Trigger ports from
computers on the LAN.
This displays the protocol of the port triggering rule.
This displays the time (in milliseconds) after the CGN2
opens the Target ports that it should close them.
Use this field to turn each port triggering rule on or off.
Select this checkbox to enable the port triggering

rule.
Deselect this checkbox to disable the port triggering

rule.
Click this to define a new port triggering rule. See
Adding or Editing a Port Triggering Rule
information on the screen that displays.
Select a port triggering rule's radio button (
this to make changes to the rule. See
a Port Triggering Rule
screen that displays.
Select a port triggering rule's radio button (
this to remove the rule. The deleted rule's information
cannot be retrieved.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
on page
Adding or Editing
on page 71 for information on the
2012 Hitron Technologies
2012 Hitron Technologies
71 for
) and click
) and click