Table 2: Hardware Connections - Hitron CGN2 User Manual

Table 2: Hardware Connections
ON/OFF
WPS PBC
Reset
16 16
HITRON CGN2 USER'S GUIDE
Use this button to turn your CGN2 on or off.
To turn the CGN2 on, press and hold the ON/OFF

button for less than 1 second.
To turn the CGN2 off, press and hold the ON/OFF

button for longer than 4 seconds.
Press this button to begin the WiFi Protected Setup
(WPS) Push-Button Configuration (PBC) procedure.
Press the PBC button on your wireless clients in the
coverage area within two minutes to enable them to join
the wireless network.
See WPS on page 85
Use this button to reboot or reset your CGN2.
Press the button and hold it for less than five seconds

to reboot the CGN2. The CGN2 restarts, using your
existing settings.
Press the button and hold it for more than five

seconds to delete all user-configured settings and
restart the CGN2 using its factory default settings.
See Resetting the CGN2
information on resetting the CGN2.
NOTE: Unless you previously backed-up the CGN2's
configuration settings prior to resetting the
CGN2, the settings cannot be recovered.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
for more information.
on page 25 for more
2012 Hitron Technologies
2012 Hitron Technologies