Hitron CGN2 User Manual page 20

Table 3: LEDs
LAN 1~4 Off
Green, blinking
Green, steady
Blue, blinking
Blue, steady
Status Blinking
On
US Green, blinking
Green, steady
Blue
Off
DS Green, blinking
Green, steady
Blue
Off
Power On
Off
20 20
HITRON CGN2 USER'S GUIDE
No device is connected to the relevant LAN port.
A device is connected to the relevant LAN port via a
Fast Ethernet (100Mbps) link, and is transmitting or
receiving data.
A device is connected to the relevant LAN port via a
Fast Ethernet (100Mbps) link, but is not transmitting
or receiving data.
A device is connected to the relevant LAN port via a
Gigabit Ethernet (1000Mbps) link, and is
transmitting or receiving data.
A device is connected to the relevant LAN port via a
Gigabit Ethernet (1000Mbps) link, but is not
transmitting or receiving data.
The CGN2's cable modem is registering with the
service provider's CMTS.
The CGN2's cable modem has successfully
registered with the service provider and is ready for
data transfer.
The CGN2 is searching for an upstream frequency
on the CABLE connection.
The CGN2 has successfully located and locked
onto an upstream frequency on the CABLE
connection.
The CGN2 is engaged in channel bonding on the
upstream connection.
There is no upstream activity on the CABLE
connection.
The CGN2 is searching for a downstream
frequency on the CABLE connection.
The CGN2 has successfully located and locked
onto a downstream frequency on the CABLE
connection.
The CGN2 is engaged in channel bonding on the
downstream connection.
There is no downstream activity on the CABLE
connection.
The CGN2 is receiving power.
The CGN2 is not receiving power.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies