Advertisement
Quick Links
Weave Cable Modem Setup Guide
These instructions detail how to install a Hitron CGNM 3550 cable modem and router with
Weave's network. Please contact Weave Support at any point in time, if the instructions do not
make sense or you are not getting the same results as the pictures.
Please note, you may have received your modem but your internet will not work until Weave
Networks has correctly connected you to the network. Please make sure you have received an
email or a call from a Weave staff member saying your internet is now connected before
attempting the below.
Step 1
Unbox the Hitron CGNM 3550 modem (or if you have your own modem). It should look like the
picture above.
1
4
www.weavenetworks.com
1-587-415-2900
support@weavenetworks.com
Page
/
Advertisement
Related Manuals for Hitron CGNM 3550
Summary of Contents for Hitron CGNM 3550
- Page 1 Weave staff member saying your internet is now connected before attempting the below. Step 1 Unbox the Hitron CGNM 3550 modem (or if you have your own modem). It should look like the picture above. 1...
- Page 2 Weave Cable Modem Setup Guide Step 2 Take the coax cable, it should look like the cable pictured. Step 3 Plug one end of the coax cable into the wall socket. Make sure to screw the cable in tight. You will find these normally in your living room or bedrooms where a TV can be connected.
- Page 3 Weave Cable Modem Setup Guide Step 5 Power on the modem. You can achieve this by connecting the power into the modem and then connect it to a wall power socket. Step 6 Wait up to 5 minutes, then the lights on the modem should now show the following: Power Solid Green Uplink (Up arrow house)
- Page 4 Weave Cable Modem Setup Guide Step 7 You should now able to connect your computer to one of the yellow ports on the back of your modem and have internet access to your computer. Step 8 You have now successfully set up your internet. You should now be able to connect to the wireless using a phone or laptop and get internet access.