Date And Time - Verizon HomeFusion Broadband User Manual

8 GUI: Advanced Settings
8.2.9

Date and Time

Introduction
The Date and Time page allows you to configure the date and time that the HBR will
be using for System logging.
For more information, see
Accessing the Date and Time page
Proceed as follows:
1 On the top menu, click Advanced and then click Yes t o confirm that you want to
access the advanced settings.
2 Under
3 In the Time Zone list, select your time zone or select Other to create one if your
time zone is not listed.
4 Under Daylight Saving Time you can change the daylight saving settings
5 Under Automatic Time Update:
 Select Enabled if you want the HBR to synchronize its time settings with a
Network Time Protocol (NTP) server. This guarantees you that you will always
be using the correct time.
 Clear Enabled if you want to set the time manually. Use the Clock Set button
on the bottom of the page to enter the correct date and time.
6 Click Apply.
DMS-CTC-20110909-0007 v2.0
"9.2.1 System Log" on page
, click Date and Time.
130.
124