Table of Contents
Advertisement
8
GUI: Advanced Settings
8.1.2
Restore Defaults
Introduction
The Restore Defaults page allows you to restore the HBA to the factory defaults.
As described in
responsible for bringing the Verizon services into your home.
It is therefore important to know that a reset to defaults may influence
specific services. If you reset:
The HBR, local network settings such as changes to WiFi SSID or keys, the
LAN address range, or time zone/DST will be lost.
The HBA, settings of Internet-related services such as Firewall, port
forwarding, and Parental controls would be reset.
Resetting the HBA
Proceed as follows:
1 On the top menu, click Advanced.
2 The Advanced page appears. Click HBA Advanced Settings on the bottom of
the page and then click Yes t o confirm that you want to access the advanced
settings.
3 Under
4 The Attention page appears.
5 Optionally, click Save Configuration File to save the current configuration of the
HBA. This allows you to restore this configuration at any time. For more
information, see
6 Click Restore Defaults.
7 The HBA prompts you to confirm your choice.
Click Restore OK.
DMS-CTC-20110909-0007 v2.0
"1.1 Basic Concepts" on page
, click Restore Defaults.
"8.1.10 Configuration File" on page
3, both the HBR and the HBA are
93.
81
Advertisement
Table of Contents
Troubleshooting
