Powering On The Hbr - Verizon HomeFusion Broadband User Manual

2 Setup
2.2

Powering on the HBR

Procedure
1 Take the power supply that is included with your HBR.
2 Connect the power cord to the Power port of the HBR.
3 Plug the other end into an electrical outlet.
4 Push the On/Off switch to turn on the HBR.
5 Wait a few minutes to allow the HBR to complete the start up phase.
6 The Power LED on the front panel of the HBR must be solid green.
7 After a few minutes, the Internet (
If this is not the case, make sure that the coaxial cable is connected properly at
both ends. For more information, see
Network" on page
DMS-CTC-20110909-0007 v2.0
Off On
14.
Power
) LED must be solid green.
"2.1 Connecting the HBR to the MoCA
15