8
GUI: Advanced Settings
8.1.19 Date and Time
Introduction
The Date and Time page allows you to configure the date and time that the HBA will
be using for:
Scheduler Rules
For more information, see
System logging
For more information, see
Accessing the Date and Time page
Proceed as follows:
1 On the top menu, click Advanced.
2 The Advanced page appears. Click HBA Advanced Settings on the bottom of
the page and then click Yes t o confirm that you want to access the advanced
settings.
3 Under
4 In the Time Zone list, select your time zone or select Other to create one if your
time zone is not listed.
5 Under Daylight Saving Time you can change the daylight saving settings.
6 Under Automatic Time Update:
Select Enabled if you want the HBA to synchronize its time settings with a
Network Time Protocol (NTP) server. This guarantees that you will always be
using the correct time.
Clear Enabled if you want to set the time manually. Use the Clock Set button
on the bottom of the page to enter the correct date and time.
7 Click Apply.
DMS-CTC-20110909-0007 v2.0
"8.1.20 Scheduler Rules" on page
"9.2.1 System Log" on page
, click Date and Time.
108.
130.
107