Basic Security Settings - Verizon HomeFusion Broadband User Manual

4 GUI: Wireless Settings
4.2

Basic Security Settings

Introduction
The Basic Security Settings page allows you to configure the basic wireless settings
of the HBR in a step-by-step approach.
Your changes will only be applied as soon as you click the Apply button.
Overview of the steps
This section describes:
Step 1: Turn Wireless ON/OFF
Step 2: Change the SSID setting to any name or code you want
Step 3: Channel
Step 4: Click on the button next to WEP
Step 5: Select a WEP Key
Step 6: Turn WPS ON
Step 7: Write down wireless settings
Step 1: Turn Wireless ON/OFF
If you want to:
 Turn on the wireless interface, select On.
 Turn off the wireless interface, select Off.
Be aware that wireless access will no longer be available. Make sure that nobody
is using the wireless connection before turning it off.
We recommend that you leave the wireless interface turned on.
Step 2: Change the SSID setting to any name or code you want
If you want to change the default network name of your wireless network, type the
new network name in the SSID box.
DMS-CTC-20110909-0007 v2.0 37