6
GUI: Firewall Settings
6.2
Access Control
Introduction
The HBR has an integrated access control list that allows you to block access to
specific services on the Internet.
You are able to configure:
Which service has to be blocked (for example: no surfing on the Internet)
Which computers should have this restriction (for example: your children's
computers)
When does this restriction need to be active (for example: after 10pm).
Accessing the Access Control page
Proceed as follows:
1 On the top menu, click Firewall Settings.
2 The HBR prompts you to confirm your choice. Click Yes.
3 On the left menu, click Access Control.
4 The Access Control table appears:
To:
Deactivate a rule, clear the check box next to the network device.
Reactivate a rule, select the check box next to the network device.
Edit a rule, click
Delete a rule, click
Add a new rule, click Add on the bottom of the table. For more information,
see
"Adding new access control rules" on page
Adding new access control rules
Proceed as follows:
1 On the bottom of the Access Control table, click Add.
2 The Add Access Control Rule appears:
DMS-CTC-20110909-0007 v2.0
.
.
58.
58