Connecting Your Wireless Device Manually - Verizon HomeFusion Broadband User Manual

2 Setup
2.3.2

Connecting Your Wireless Device Manually

Requirements
 Your network device must be equipped with a WiFi-certified wireless client.
 Your network device must be configured to obtain an IP address automatically.
This is the default setting.
Procedure
If you want to connect a computer using the wireless network, configure the
wireless client on your computer with the wireless settings printed on the label of
the HBR.
The default encryption type is WPA2.
To configure these settings on:
 Windows 7, proceed with
 Windows Vista, proceed with
page 20.
 Windows XP, proceed with
 Mac OS X, proceed
 On another operating system, consult the help of your wireless client or
operating system.
DMS-CTC-20110909-0007 v2.0
SSID: **************
WEP/WPA2 key: **************
"Connect your computer on Windows 7" on page
"Connect your computer on Windows Vista" on
"Connect your computer on Windows XP" on page
with"Connect your computer on Mac OS X" on page
20.
21.
22.
19