Verizon HomeFusion Broadband User Manual page 146

10 Support
10.3 Resetting your HBR
Resetting your HBR
If at some point you can no longer connect to the HBR or you want to make a fresh
install, it may be useful to perform a reset to factory defaults.
Warning
A reset to factory default settings deletes all configuration changes you made. For
example:
 The SSID and WPA key on the back of the HBR will be used to secure your
wireless connection. So you may need to re-associate your wireless clients, as
described in
 The Login password required to access the GUI pages will be reset to the one
that is printed on the back of the HBR.
Methods
You can choose between:
 Resetting the HBR via the HBR GUI
 Reset the HBR via the Reset button
Resetting the HBR via the HBR GUI
Proceed as follows:
1 Browse to the GUI.
For more information, see
2 On the top menu, click Advanced.
3 The Advanced page appears. Click HBR Advanced Settings on the bottom of
the page and then click Yes t o confirm that you want to access the advanced
settings.
4 Under
5 The Restore HBR Defaults page appears. Click Restore Defaults.
6 The HBR prompts you to confirm your choice, click OK.
7 The HBR restores the factory defaults and restarts.
8 The HBR returns to the HBR login page.
DMS-CTC-20110909-0007 v2.0
"2.3.2 Connecting Your Wireless Device Manually" on page
"Accessing the GUI" on page
, click Restore Defaults.
19.
27.
141