Wall Mounting The Hbr (Optional) - Verizon HomeFusion Broadband User Manual

2 Setup
2.4

Wall Mounting the HBR (Optional)

Introduction
This section will help you to wall mount the HBR.
What you need
 A power drill
 A pencil to mark the mounting holes
 A small level is recommended to level the two holes
 The following box items:
 The HBR
 The wall mount bracket
 The screws and wall plugs
Procedure
Proceed as follows:
1 Place the wall mount bracket against the wall at the position where you want to
mount the HBR.
2 Mark the mounting holes with a pencil.
If possible, use a level placed on top of the bracket to level the bracket.
3 Put the wall mount bracket down.
4 If you want to:
 Use wall plugs, drill the mounting holes with a 15/64 inches diameter drill bit
and insert the wall plugs in the drilled holes.
 Insert the screws directly into the wall, drill the mounting holes with a 5/64
inches diameter drill bit.
The wall plugs are used in softer material such as drywall to provide a
more secure mount.
DMS-CTC-20110909-0007 v2.0 24