Table of Contents
Advertisement
1
Getting Started
1.3.2
Back Panel
Overview
The following picture gives you an overview of all the back panel components:
USB port (A)
Allows you to power or charge your USB devices. The USB port can deliver up to
500mA of current. Consult the documentation of your device to check how much
current it needs to be able to power or charge.
Any other possible use of the USB port is currently not supported.
Power switch (B)
Allows you to switch the
Power inlet (C)
This is where you will plug in the power adapter.
Reset button (D)
If you press this button for:
2 seconds, the HBR will reboot.
10 seconds, the HBR will return to its factory default settings. All changes that you
made to the default configuration will be lost. For example: wireless settings,
date and time settings, static IP address allocation and so on.
DMS-CTC-20110909-0007 v2.0
A
C
B
D
on/off.
HBR
E
G
F
10
Advertisement
Table of Contents
Troubleshooting
