Verizon HomeFusion Broadband User Manual page 44

4 GUI: Wireless Settings
3 If needed, complete the other steps
4 Click Apply on the bottom of the page.
Step 6: Turn WPS ON
Wi-Fi Protected Setup (WPS) allows you to add new wireless clients to your local
network in a swift and easy way, without the need to enter any of your wireless
settings (network name, wireless key, encryption type).
WPS can only be turned on if you are using WPA or WPA+WPA2 to encrypt your
wireless connection. If WEP or no encryption is used, the selection will be
unavailable.
To turn WPS on/off:
1 Under WPS, select On/Off.
2 If needed complete the other steps.
3 Click Apply.
Step 7: Write down wireless settings
This step gives you an overview of the settings that will be active as soon as you click
the Apply button on the bottom of the page.
You can print or write down this overview, this might be useful when configuring a
wireless client.
APPLY YOUR CHANGES
Do not forget to click Apply on the bottom of your page to activate your changes.
DMS-CTC-20110909-0007 v2.0 39