Table of Contents
Advertisement
6
GUI: Firewall Settings
6.9
Security Log
Introduction
The security log displays a list of firewall-related events, including attempts to
establish inbound and outbound connections, attempts to authenticate at an
administrative interface (GUI or Telnet terminal), firewall configuration, and system
start-up.
Accessing the Security Log page
Proceed as follows:
1 On the top menu, click Firewall Settings.
2 The HBR prompts you to confirm your choice. Click Yes.
3 On the left menu, click Security Log.
4 The Security Log page appears.
Security log table
The security log table provides you the following information:
Time:
The time (based on the HBR's date and time settings) the event occurred.
Event:
There are three kinds of events listed in the system log: Firewall Info, Firewall
Setup, and System Log.
Event-Type:
The "Details" column displays more information about the packet or the event,
such as protocol, IP addresses, ports, etc.
Details:
Displays a textual description of the event
DMS-CTC-20110909-0007 v2.0
70
Advertisement
Table of Contents
Troubleshooting
