Verizon HomeFusion Broadband User Manual page 18

2 Setup
Setup procedure
Complete the following steps to setup the HBR:
1 If a different router was being used previously, disconnect it. Remove all
components, including power supplies and cables; they will not work with the
HBR.
2 Connect the HBR to the HBA.
For more information, see
page 14.
3 Power on the HBR.
For more information, see
4 Connect your network devices.
For more information, see
Normally, the Verizon Wireless technician already took care of the
installation of your HBR and HBA. So the only thing that you might need to
do is add new network devices to your network.
In case of problems
If you have trouble configuring the HBR, try the following:
1 Refer to
2 If you did not find a solution in the Troubleshooting section, call the Customer
Care at 800-922-0204.
Optional configuration
After completing the setup procedure, the HBR is ready for use. Optionally, you can
now:
 Further configure the HBR to your needs (for example, change the wireless
security) using the Graphical User Interface (GUI) of the HBR.
For more information, see
 Wall mount the HBR. For more information, see
(Optional)" on page
DMS-CTC-20110909-0007 v2.0
"2.1 Connecting the HBR to the MoCA Network" on
"2.2 Powering on the HBR" on page
"2.3 Connecting Your Network Devices" on page
"Support" on page 136.
"Graphical User Interface (GUI)" on page
24.
15.
26.
"2.4 Wall Mounting the HBR
16.
13