Right Rear Cover - HP Omni Pro 110 Maintenance & Service Manual

Right Rear Cover

The right rear cover is located on the right, rear of the computer. You must remove it to access
memory and system board components.
To remove the right rear cover:
1. Prepare the computer for disassembly (see
on page
2. Position the computer with the rear facing you.
3. Remove the small rear cover (see
4. Remove the stand (see
5. Slide the cover toward the right and off the computer.
Figure 7-8
To replace the right rear cover, reverse the removal procedures.
27).
Stand on page
Removing the right rear cover
Preparing to Disassemble the Computer
Small Rear Cover on page
29).
28).
Right Rear Cover 35