Computer Setup-Advanced; Computer Setup-Power - HP Omni Pro 110 Maintenance & Service Manual

Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
WARNING!
Table 3-2 Computer Setup—Advanced
Option
CPU Type
CPU Speed
Cache RAM
Supervisor Password
User Password
Onboard LAN
Onboard WLAN
Onboard LAN Boot
ROM
Onboard 1394
Primary Video Adapter Allows you to select the boot display device when more than 2 video options are offered by the
SATA Controller
SATA Controller Mode
Onboard Audio
USB Ports
Change Supervisor
Password
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Setting items on this menu to incorrect values may cause your system to malfunction.
Description
(view only)
(view only)
(view only)
Allows you to establish, disable, or change the supervisor password.
Allows you to establish, disable, or change the user password.
NOTE: Only displays if a Supervisor password is set.
Allows you to disable/enable onboard LAN controller. Default is enabled.
Allows you to disable/enable onboard WLAN controller. Default is enabled.
Allows you to disable/enable the boot ROM of the onboard LAN chip. Default is enabled.
Allows you to enable/disable all 1394 ports. Default is enabled.
system:
●
Integrated (Onboard)
●
PCI-E
Allows you to disable/enable the SATA controller. Default is enabled.
If SATA Controller is enabled, allows you to set the mode to:
●
IDE
●
AHCI (default)
Allows you to set the onboard audio to:
●
Auto (default)
●
Disabled
●
Enabled
Allows you to individually disable/enable USB ports. Default is enabled.
Allows you to change the supervisor password. Press
again to disable the password.
Enter to change the password. Press
Computer Setup (F10) Utilities
Enter
9