Display Panel - HP Omni Pro 110 Maintenance & Service Manual

Display Panel

Description
Display, 20-inch, non-glare
The display panel is secured with 4 screws.
To remove the display panel:
1. Prepare the computer for disassembly (see
on page
2. Remove the small rear cover (see
3. Remove the stand (see
4. Remove the right rear cover (see
5. Remove the heat sink (see
6. Remove the rear cover (see
7. Remove the system board shield (see
8. Remove the system board (see
9. Remove the stand bracket (see
10. Remove the drive connectors (see
11. Remove the front bezel (see
27).
Stand on page
Heat Sink (Thermal Module) on page
Rear Cover on page
Front Bezel on page
Preparing to Disassemble the Computer
Small Rear Cover on page
29).
Right Rear Cover on page
46).
System Board Shield on page
System Board on page
Stand Bracket on page
Drive Connectors on page
60).
Spare part number
646794-001
28).
35).
38).
51).
56).
58).
59).
Display Panel 63