Section 4: Operations; Operation Safety; Operation Tips - Grizzly G0451 Instruction Manual

SECTION 4: OPERATIONS

Operation Safety

Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
-34-

Operation Tips

Your safety is important. The tips below are
intended to supplement Section 1: Safety. But
remember, no safety list can be comprehensive
of every situation. The operator is ultimately
responsible for their own safety, as well as the
safety of bystanders. Every cutting operation is
uniquely different and may require safety equip-
ment or safety procedures not mentioned in this
manual.
Please follow these tips EVERY time you use
your saw:
• Stand to the left of the blade line-of-cut when
performing a cutting operation.
• Turn OFF the saw and allow the blade to
come to a complete stop before removing the
cut-off piece.
• Make sure that the riving knife is always
aligned with the main blade before cutting!
• Always position the blade guard to the cor-
rect height above the workpiece.
• Carefully plan each cutting operation to avoid
injuries.
• When you release the sliding table lock,
make sure that the knob is positioned so that
it will not lock the table during a cut.
G0451 14" Sliding Table Saw