(4) Beeper, indicator LED and vibrator
Items
Beeper
Beeping time of a short beep
Beeper volume
Beeper frequency
Trigger timing for the reading completion
beeper and indicator LED
Beeper when reading RSS-14 Stacked and
RSS-14 Stacked Omnidirectional
Beeping pattern when reading RSS-14
Stacked and RSS-14 Stacked
Omnidirectional
Indicator LED
Vibrator
The beeper and indicator LED parameters above apply to reading confirmation. They do not affect the functions of the
beeper and indicator LED used for confirmation of wireless link's connection/disconnection and verification result.
Parameters
Enable
Disable
Short (60 ms)
Medium (80 ms)
Long (120 ms)
High
Medium
Low
Low (2.0 kHz)
Medium (4.0 kHz)
High (4.3 kHz)
Before data transmission
After data transmission
Enable
Disable
One-shot beep
Intermittent beep
Enable
Disable
"OK" vibrations
"NG" vibrations
Disable
: Can be changed only with the configuration software.
60
Defaults
Refer to:
√
Section 9.1
√
Section 9.1
√
Section 9.1
√
Section 9.1
√
√
Section 9.1
√
√
Section 9.2
√
Section 9.3