Chapter 13 Bar-Coded Parameter Menu for Scanners
13.1 Parameter Setting Procedure Using the Bar-Coded Parameter Menu
Start operation
↓ Three beeps
Start setting
↓ Three beeps
Scan parameter
setting bar codes.
↓
End setting
Three beeps
Scanning the "All defaults" bar code in the bar-coded parameter menu makes all items in that menu revert to the
factory defaults.
Note: Scan the "Start operation" bar code first before setting any parameter.
Note: It is not necessary to scan the "Start setting" bar code for setting the
"Scanning with Bluetooth
parameters.
Scan the "Start operation" bar code if the "End operation" has been selected.
Scan the "Start setting" bar code.
This step is not required for setting the "Enabling the Bluetooth
"Scanning with Bluetooth
"Configuring the scanner as slave" parameters.
Scan desired parameter setting bar codes.
Note: When using the bar-coded parameter menu, scan bar codes within three
minutes. Otherwise, the scanner cancels new settings and returns to the previous ones.
Scan the "End setting" bar code.
®
wireless link broken," "Adjusting the beeper volume," and "Configuring the scanner as slave"
®
wireless link broken," "Adjusting the beeper volume," and
"Enabling the Bluetooth
69
®
interface,"
®
interface,"