Chapter 1 Part Names And Functions - Denso GT10B-SB User Manual

Chapter 1 Part Names and Functions

Reading window
Point this at the bar
code to read.
Built-in antenna
Bluetooth
Do not modify this
antenna section or
cover it by hand.
Trigger switch
Press this to read a bar code or
initiate a Bluetooth
The following trigger switch
operating modes are available:
• Auto-off mode 1
• Auto-off mode 2
• Momentary switching mode 1
• Momentary switching mode 2
• Continuous reading mode
(The factory default is momentary
switching mode 1.)
In addition, the auto sensing mode is
also available for automatic trigger
operation.
Refer to Chapters 2 and 5 for
details.
®
antenna.
®
wireless link.
Indicator LED
This turns blue after a successful read and red
if there is an error. It also indicates the
®
Bluetooth interface status and, when the
scanner is in its charger, the charging status.
(Refer to Chapter 9 for details.)
Battery cover
Remove this to replace the battery
cartridge.
(Refer to Chapter 11 for details.)
1
Magic key
Holding down this key for approx. 2
seconds breaks Bluetooth
links.
This key also functions as an
auxiliary key for reads, data
transfers, and the like. These
auxiliary functions include:
- Illumination LED switching function
- Data retransfer function
- Specific character transfer function
- Ready/standby switching function
- Auto sensing mode switching
function
- Continuous reading mode
switching function
(The factory configuration assigns
none of these functions to this key.)
Refer to Chapter 6 for details.
®
wireless