Blocksorting Data - Denso GT10B-SB User Manual

(2) Transferring the substituted element string
If the bar code data contains the specified substitution string within the specified search area, the scanner transfers the
substituted element string followed by the bar code data read.
(Example)
Search start position
2nd digit
5th digit
9th digit
(3) Transferring the substituted full string
If the bar code data contains the specified substitution string within the specified search area, the scanner substitutes
the search string with the substitution string and transfers the full string. If it contains two or more search strings, only
the first one is substituted.
(Example)
Search start position
2nd digit
5th digit
9th digit
8.3

Blocksorting Data

The scanner splits bar code data read into a maximum of 5 blocks at the specified split positions and sorts those blocks
in the specified order.
The split position must be specified by the number of digits from the head of bar code data. Specifying the number of
digits exceeding that in the bar code data results in an error.
The following sample bar code and scanner settings output data as listed below depending upon the sorting conditions.
- Bar code sample
Bar code type: Code 128, Data read: 1234567890
- Scanner settings
Header: STX, Terminator: ETX, Prefix/Suffix: None, Code ID mark: Type 1,
Transmission of number of digits: 2 digits
(Example)
Split position
3rd and 8th digits
3rd and 8th digits
Search string Substitution string
456 A
890 XYZ
890 XYZ
Search string Substitution string
456 A
890 XYZ
890 XYZ
Order of blocks
Block 2, 1, 3
Block 1, 3
[STX]K11A1234567890[ETX]
[STX]K13XYZ1234567890[ETX]
Error
[STX]K08123A7890[ETX]
[STX]K101234567XYZ[ETX]
Error
Output data
[STX]K104567812390[ETX]
[STX]K0512390[ETX]
27
Output data
Output data