Chapter 14 Bar-Coded Parameter Menu For Bluetooth ® Adapters (Ba10-Rku); Configuring The Bluetooth ® Adapter From The Scanner - Denso GT10B-SB User Manual

Chapter 14 Bar-Coded Parameter Menu for Bluetooth
14.1 Configuring the Bluetooth
The scanner can configure the Bluetooth
memory via the Bluetooth
Scanner
®
Store the Bluetooth
adapter parameter settings
into the scanner memory.
↓
®
Bluetooth adapter
®
Power the Bluetooth
adapter.
↓
®
Bluetooth adapter
Switch to the setup mode.
↓ Scanner
Bluetooth
(The Bluetooth
Scanner
Establish the Bluetooth
wireless link.
↓
Scanner's indicator LED: Flashes blue
(The scanner beeps three times and initiates a Bluetooth
®
Scanner → Bluetooth
adapter
Transfer the Bluetooth
adapter parameter settings.
↓ Scanner
Bluetooth
®
Adapter from the Scanner
®
adapter by transferring the adapter parameter settings held in the scanner
®
wireless link using the following procedure.
Use the scanner to scan the bar-coded parameter menu prepared for Bluetooth
adapters (Section 14.2) to store their settings into the scanner memory.
Note: Using the configuration software ScannerSetting designed for scanners also
allows parameter settings for Bluetooth
the adapter via a USB-COM or RS-232C interface to the host computer. For details,
refer to the "Bluetooth
Power the Bluetooth
Note: Any type of interfaces that power the Bluetooth
regardless of the interface setting made in the adapter. For the interfacing procedure,
refer to the "Bluetooth
Hold down the SETUP button provided on the bottom of the Bluetooth
at least 0.5 second with a pin or the like to switch to the setup mode.
Note: Leaving the Bluetooth
SETUP button automatically exits the setup mode.
Indicator LED: Remains Off
®
adapter Interface/power supply LED: Flashes orange
Bluetooth
®
adapter, as a slave, is waiting for a master to connect.)
Use the scanner holding Bluetooth
®
printed on the bottom of the Bluetooth
After establishment of the Bluetooth
®
Bluetooth adapter about the current status and transfers the Bluetooth
parameter settings stored in the memory.
Tip: If the scanner cannot receive an acknowledge response from the Bluetooth
®
adapter, it cancels the parameter setting sequence. Both the scanner and Bluetooth
adapter automatically return to standby for initiation of the Bluetooth
Indicator LED: Flashes green
®
adapter Bluetooth
®
®
Adapter User's Manual."
®
adapter.
®
Adapter User's Manual," Chapter 2.
®
adapter for 3 minutes or more after depression of the
®
status display LED (blue): Flashes slowly
®
adapter parameter settings to scan the bar code
®
adapter.
®
wireless link, as a master.)
®
wireless link, the scanner inquires of the
®
status display LED (blue): Flashes rapidly
90
®
Adapters (BA10-RKU)
adapters. It, however, requires connecting
®
adapter can be used,
®
®
adapter for
®
adapter
®
®
®
wireless link.