Indication Of Bluetooth ® Wireless Link Status - Denso GT10B-SB User Manual

2.5 Indication of Bluetooth
The scanner's indicator LED and beeper together indicate the status of the scanner's Bluetooth
When the trigger switch is held down:
Indicator LED
Red, blinking
Red, blinking twice repeatedly
When the trigger switch is pressed and released:
Indicator LED
Blue, blinking rapidly
Blue, blinking slowly
®
When the Bluetooth wireless link is established or broken:
Indicator LED
Green for 0.5 second
Red for 0.5 second
®
Wireless Link Status
Beeper
Reading is not possible when there is no Bluetooth
Silent
The scanner has scanned the "End operation" bar code.
Beeper
The scanner, as a master, is searching for a connection target.
Silent
The scanner, as a slave, is waiting for a master to connect.
Beeper
Two short beeps The Bluetooth
Long beep The Bluetooth
Scanner Status
Scanner Status
Scanner Status
®
wireless link is ready for use.
®
wireless link no longer exists.
7
®
wireless link.
®
wireless link.