Establishing Bluetooth ® Wireless Link - Denso GT10B-SB User Manual

2.2 Establishing Bluetooth
After enabling the Bluetooth
®
Bluetooth adapter (or some other Bluetooth
a master and slave (default).
A scanner configured and connected as a master remembers previous target devices, so, even if the link is broken,
pressing the scanner trigger switch is all that it takes to reconnect.
Scanner as Master
Using the Bluetooth
(1) Use the scanner to read the bar code on the back of the Bluetooth
The scanner configures itself as a master and establishes a Bluetooth
Even if the scanner has been configured as a slave, reading this bar code initiates connection as a master.
(2) Wait for the scanner to beep twice and the indicator LED to turn green (for 0.5 second).
Using some other Bluetooth
To configure the scanner as a master and some other Bluetooth
given below and specify the slave's Bluetooth
device should be 1:1.
(1) Confirm the device's Bluetooth
For the instructions on how to confirm, see the user's manual.
(2) Create a "Bluetooth
The following is the procedure for configuration software (ScannerSetting)* versions 2.4.0 and later.
1) Run the configuration software on your computer.
2) On the Options screen, select GT10B SB as the product name and press the Offline button. (Shown below is a
screen in configuration software version 2.5.0.)
* Registered users can download the configuration software (ScannerSetting) from QBdirect, their customer support
section on the Denso Wave website at no extra charge.
For further details on QBdirect or to register, visit the following URL.
http://www.qbdirect.net
®
Wireless Link
®
interface, establish a Bluetooth
®
®
adapter
®
device
®
address.
®
address" bar code for the Bluetooth
®
wireless link between the scanner and the BA10-RKU
equipment) using the following procedures. The scanner can act as both
®
equipment as a slave, follow the sample procedures
®
address to the scanner. The connection ratio of the scanner and slave
®
address thus obtained.
3
®
adapter.
®
wireless link with the Bluetooth
®
adapter.