Oce TCS500 User Manual page 98

The user interface of the Océ Queue Manager
The status bar
The status bar at the bottom of the Océ Queue Manager displays the following.
The system status (connected or disconnected).
The system name ('Localhost' if you work on the Océ Power Logic
The job status (for example 'Printing').
The user mode ('Key Operator', 'Repro Operator', 'System Administrator',
'Service Operator'or 'Anonymous').
The window for the print queue
The print queue window in the left-hand pane contains two sections.
The top section above the separation line shows the job that is printed.
The bottom section under the separation line shows the jobs that wait to be
printed. The window displays the jobs in the order in which the jobs are received.
The window for the inbox queue or history queue
The inbox queue in the right-hand pane contains the jobs that were sent to the inbox
on the controller. You can print the jobs, delete the jobs and view the properties of
the jobs. The print jobs are sent to the inbox when the setting Key Operator -
System - Job management - Print jobs in the Océ Settings Editor is set to inbox or
when 'Send to inbox' is enabled in the driver.
The history queue in the right-hand pane contains the jobs that have been printed.
You can print the jobs, delete the jobs and view the properties of the jobs. Use the
setting Key Operator - System - Job management - History queue - Print job
lifetime in the Océ Settings Editor to define how long the jobs must remain in the
history queue.
98 Chapter 4 Use the PLC applications to control your workflow
®
controller).