Use Océ Remote Logic® To Control Your Workflow From A Remote Workstation; Introduction To Océ Remote Logic - Oce TCS500 User Manual

Introduction to Océ Remote Logic®
Use Océ Remote Logic
workflow from a remote workstation
Introduction to Océ Remote Logic®
The applications of Océ Remote Logic®
You must use Océ Remote Logic
applications if you do not have a keyboard, mouse and monitor with your Océ Power
®
Logic controller.
You can use Océ Remote Logic
workstation.
Océ Settings Editor
Use the application to change the default settings of the system.
Océ Queue Manager
Use the application to manage the print jobs.
Océ System Control Panel
Use the application to view the status of the printer, the scanner and the
controller. You can also view the media available on the printer and the amount
of set memory in use.
User modes
The Océ Remote Logic
Océ TCS500 users' on page
mode. This mode is for the Océ technician only.
114 Chapter 4 Use the PLC applications to control your workflow
®
to connect to the Océ Power Logic
®
to run the following applications from a remote
®
controller applications have different user modes
19). An additional user mode is the 'Service operator'
®
to control your
®
controller
(see 'The