Start The Applications With Océ Remote Logic - Oce TCS500 User Manual

Start the applications with Océ Remote Logic®
Introduction
Use the following 2 methods to start the applications with Océ Remote Logic
Use the programs menu of your operating system.
Use a command line parameter.
Use the programs menu to start the applications
1. Select 'Océ Remote Logic'
2. Select the 'Launcher' application.
3. Select the required application.
The application starts with your default system.
Note: You can select another system than your default system
controller' on page
Use command line parameters to start the applications
Six command line parameters are available to facilitate the start of the applications.
configfile=<config_file>
Sets the configuration file to use.
server=server
Sets the indicated server as the server to connect to.
language1=lang
Specifies the first language in combination with the parameter
country1=country.
country1=country
Specifies the first language in combination with the parameter
language1=language.
language2=lang
Specifies the second language in combination with the parameter
country2=country.
country2=country
Specifies the second language in combination with the parameter
language2=language.
Note: Always use a matching combination of language and country (see the
following table).
Start the applications with Océ Remote Logic®
120).
®
.
(see 'Connect to the
117