Define The Output Quality; The Quality Modes - Oce TCS500 User Manual

Define the output quality

The quality modes

Introduction
The Océ TCS500 enables you to select the correct quality mode for your output
requirements. You can define the required quality mode in the printer driver. You can
define the default quality mode in the Océ Settings Editor.
The Quality modes
Use these modes to define the output quality. You can select the following.
[68]
[68] The output quality
Quality mode
'Check'
'Release'
'Presentation'
Function
The print speed is maximum. This quality mode is used for
fast printing of (line) drawings with good output quality.
For other types of jobs, like print jobs with area coverages,
you can use this quality mode to check if all the
information is visible on the printed output. For these print
jobs the output quality is good.
The print speed is very high. This quality mode is best for
drawings, very good for images and provides a good
combination of output quality and productivity. In this
quality mode the printer will automatically optimize the
print quality and the productivity based on the file content.
Drawings will be printed twice as fast as images, resulting
in optimal productivity and quality for most customers.
The Océ TCS500 further offers Dynamic switching
Technology. In case a print job has mixed contents
(drawings and images), the printer will adjust the print
quality and the productivity automatically during the print
process, without customer intervention.
Select this quality mode if you need the best possible
output quality. Especially for images, posters. The print
speed is high.
The quality modes
187