Save, Load And Print The Settings - Oce TCS500 User Manual

Save, load and print the settings

Save, load and print the settings
Introduction
It is possible that you need different settings for different customers, departments or
other conditions. For this reason, you can save the settings to a file and then load the
settings from a file.
The Océ TCS500 has the following special files for your use.
Backup.kos/Backup.sas
1.
These files contain the previous values for the key operator settings and the system
administrator settings before the last 'Apply'.
Current.kos/Current.sas
2.
These files contain the values for the key operator settings and the system
administrator settings after the last 'Apply'.
If you need a complete overview of all settings defined in the Océ Settings Editor,
you can print a list of all current settings.
How to save the settings to a file
From the 'File' menu, select 'Save as...'.
1.
You can also click the 'Save as...' button on the toolbar.
If the client is a local client, the screen displays a dialog box. The user can enter a
file name. The file is saved in the specified directory on the system.
If the client is a remote client, the screen displays a dialog box. The user can enter a
directory name and a file name.
Note: Repro operators and anonymous users are not authorized to save the settings
to a file.
86 Chapter 4 Use the PLC applications to control your workflow