Oce TCS500 User Manual page 181

How to make a copy and remove a strip
Place the original face down and right aligned.
1.
The scanner takes the original.
Define the job settings.
2.
Select 'Copy' with the upper-left softkey.
The copy job templates appear.
Open a copy job template with a left softkey.
The top 5 settings display.
Scroll to 'Remove strip' and open this setting with the left softkey.
Select 'Leading' or 'Trailing' with the left softkey and define the value with the
scroll wheel or numeric keys.
[66]
[153]
The 'Leading' strip
Define the number of copies if necessary and press the green start key.
3.
Note: To measure the size of a strip you can use the ruler available at the scanner
(metric).
Result
The Océ TCS500 removes a trailing or leading strip to the copy.
Make a copy and remove a strip
[154]
The 'Trailing' strip
181