Oce TCS500 User Manual page 59

[23]
[23] Change the Key Operator settings in the Océ Settings Editor
Step Action
1 Click 'File' and select 'Log on'.
2 Select 'Key Operator' and enter the password.
3 Click 'View' and select 'Key Operator settings'.
4 Navigate to the energy save mode settings.
Key Operator - Printer - Settings - Timers - Energy save mode timer
enable - Energy save mode timer
Key Operator - Printer - Settings - Timers - Energy save mode time-out
5 Change the required settings.
6 Click 'Apply'.
7 Click 'File' and select 'Log off' to prevent unauthorized use.
When the Océ TCS500 is in the energy save mode, there are four ways to activate
the system.
press a key on the printer operator panel
send a job
press the retract button to retract a roll
load a roll
The energy save mode timer
59