Oce TCS500 User Manual page 18

The product concept and complete workflow
Different jobs
The arrows in the illustration show the different possible jobs
page 17). The complete document workflow of the Océ solution includes the
following different jobs.
Print job.
A print job starts with a file (4) and ends with a print (3).
Copy job.
A copy job starts with an original (1) and ends with a copy (2).
Scan-to-file job.
A scan-to-file job starts with an original (1) and ends with a file (4).
Set-up and control the complete workflow.
Do which job where
Use the following products to do the following jobs.
Print jobs on the job submission software or printer drivers.
Copy jobs on the scanner operator panel
Scan-to-file jobs on the scanner operator panel
Set up and control the complete workflow on the controller.
Note: A setting in the job submission software or driver always overrules a system
setting.
18 Chapter 1 Introduction
(see figure 1 on