Oce TCS500 User Manual page 69

After you finish an octet, press the key for 'Next' to go to the next octet.
After you finish the last octet, the wizard will lead you through a series of dialogs
14.
where you can configure DNS, and the primary and secondary WINS.
After you have completed these dialogs, the screen shows an overview of all the
15.
network settings.
[46]
The final dialog allows you to define a password protection for the 'Configure
16.
system' wizard. You can enable the password protection to prevent accidental
changes in the configuration of the system.
The password is fixed and cannot be changed. Use the lower left (= a) and right (=
b) soft keys of the operator panel to enter the password: abbab. When the
password-protection is enabled, you must enter this password the next time you want
to edit the network settings. You can disable the password protection again at the end
of the 'Configure system' wizard.
Press the key 'Apply' to confirm the settings and to exit the wizard.
17.
The system indicates whether you have to reboot the Océ Power logic controller to
apply the new network settings. This can, for example, be the case when settings are
received through DHCP. When no indication appears, you do not need to reboot the
Océ Power logic controller.
Note: When 'Synchronize controller power on / off' is set to 'On', you must turn the
printer off and on to reboot the Océ Power Logic controller.
How to configure the system from the Océ Settings Editor
Log on to the system administrator mode.
1.
From the 'View' menu in the menu bar, select 'System Administrator settings'.
2.
Use the buttons on the left toolbar to display the required group of settings.
3.
Select the required settings in the tree structure.
4.
Define the settings in the update area.
5.
Click the 'Apply' button to confirm the new settings.
6.
Log off from the system administrator mode to prevent unauthorized use of the
7.
application.
See the on-line help in the Océ Settings Editor for more information about how to
configure the system from the Océ Settings Editor.
Configure the network settings of the Océ TCS500
69