Table of Contents
Advertisement
The panel timer
The panel timer
Introduction
When the scanner operator panel remains unused for period of time, the scanner
operator panel returns to the home screen automatically. The Océ TCS500 scanner
is ready for the next user.
Use the panel timer to define this period of time. The panel timer is always enabled.
You can use the Océ Settings Editor to change the panel time-out setting of the Océ
TCS500 scanner.
The panel time-out
The default value for the panel time-out is 90 seconds.
If you must change the default value in the Océ Settings Editor proceed as follows.
[20]
[20] Change the Key Operator settings in the Océ Settings Editor
Step Action
1
Click 'File' and select 'Log on'.
2
Select 'Key Operator' and enter the password.
3
Click 'View' and select 'Key Operator settings'.
4
Navigate to the panel time-out setting.
Key Operator - Scanner - Timers - Panel time-out
5
Change the value.
6
Click 'Apply'.
7
Click 'File' and select 'Log off' to prevent unauthorized use.
56
Chapter 3 Prepare the Océ TCS500 for use
Hide quick links:
Advertisement
Table of Contents
