System Board - HP Elite 8300 Series Convertible Minitower Maintenance And Service Manual

System Board

Description
System board (includes thermal material)
1. Prepare the computer for disassembly
2. Remove the access panel
3. When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory modules
●
Expansion cards
●
Heat sink
●
Processor
4. Remove the baffle from the chassis
5. Remove the fan from the chassis
6. Rotate the drive cage to its upright position.
7. Rotate the power supply to its full upright position.
8. Disconnect all data and power cables from the system board.
9. Disconnect the balance of the cables from the system board.
10. Remove the eight Torx T15 screws (1) that secure the system board to the chassis.
204 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
(Access Panel on page
(Memory on page
(Expansion Card on page
(Heat sink on page 197)
(Processor on page 198)
(Fan duct on page
(Front Fan Assembly on page
(Preparation for Disassembly on page
164).
169)
172)
190).
Spare part number
657094-001
163).
191).