Fan Sink - HP Elite 8300 Series Convertible Minitower Maintenance And Service Manual

Fan sink

Description
Fan sink
1. Prepare the computer for disassembly
2. Remove the computer access panel
3. In the order indicated, loosen the four captive Torx screws that secure the fan sink to the system
board.
CAUTION:
X) to even the downward forces on the processor. This is especially important as the pins on the
socket are very fragile and any damage to them may require replacing the system board.
Figure 6-34
4. Disconnect the fan cable from the white system board connector labeled CPUFAN (1).
110 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
Fan sink retaining screws should be removed in diagonally opposite pairs (as in an
Loosening the fan sink screws
(Preparation for Disassembly on page
(Access Panel on page
Spare part number
643907-001
75).
76).