Front Bezel Security
The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Remove the front bezel
4.
Remove the security screw from the inside of the front bezel.
Figure 6-3
5.
Replace the front bezel.
78
Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
(Front Bezel on page
Retrieving the Front Bezel Security Screw
(Preparation for Disassembly on page
(Access Panel on page
77).
75).
76).